Jump to content

Boron trifluoride

From Wikipedia, the free encyclopedia
(Redirected from Trifluoro-borane)
Boron trifluoride
Boron trifluoride in 2D
Boron trifluoride in 2D
Boron trifluoride in 3D
Boron trifluoride in 3D
Names
IUPAC name
Boron trifluoride
Systematic IUPAC name
Trifluoroborane
Other names
Boron fluoride, Trifluoroborane
Identifiers
3D model (JSmol)
ChEBI
ChemSpider
ECHA InfoCard 100.028.699 Edit this at Wikidata
EC Number
  • 231-569-5
RTECS number
  • ED2275000
UNII
UN number compressed: 1008.
boron trifluoride dihydrate: 2851.
  • InChI=1S/BF3/c2-1(3)4 checkY
    Key: WTEOIRVLGSZEPR-UHFFFAOYSA-N checkY
  • FB(F)F
  • [F+]=[B-](F)F
Properties
BF3
Molar mass 67.82 g/mol (anhydrous)
103.837 g/mol (dihydrate)
Appearance colorless gas (anhydrous)
colorless liquid (dihydrate)
Odor Pungent
Density 0.00276 g/cm3 (anhydrous gas)
1.64 g/cm3 (dihydrate)
Melting point −126.8 °C (−196.2 °F; 146.3 K)
Boiling point −100.3 °C (−148.5 °F; 172.8 K)
exothermic decomposition [1] (anhydrous)
very soluble (dihydrate)
Solubility soluble in benzene, toluene, hexane, chloroform and methylene chloride
Vapor pressure >50 atm (20 °C)[2]
0 D
Thermochemistry
50.46 J/(mol·K)
254.3 J/(mol·K)
−1137 kJ/mol
−1120 kJ/mol
Hazards[4][5]
GHS labelling:
Acute Tox. 2 Skin Corr. 1A GHS08: Health hazard
Danger
H314, H330, H335, H373
P260, P280, P303+P361+P353, P304+P340, P305+P351+P338, P310, P403+P233
NFPA 704 (fire diamond)
NFPA 704 four-colored diamondHealth 3: Short exposure could cause serious temporary or residual injury. E.g. chlorine gasFlammability 0: Will not burn. E.g. waterInstability 1: Normally stable, but can become unstable at elevated temperatures and pressures. E.g. calciumSpecial hazards (white): no code
3
0
1
Flash point Nonflammable
Lethal dose or concentration (LD, LC):
1227 ppm (mouse, 2 hr)
39 ppm (guinea pig, 4 hr)
418 ppm (rat, 4 hr)[3]
NIOSH (US health exposure limits):
PEL (Permissible)
 C 1 ppm (3 mg/m3)[2]
REL (Recommended)
 C 1 ppm (3 mg/m3)[2]
IDLH (Immediate danger)
 25 ppm[2]
Safety data sheet (SDS) ICSC 0231
Related compounds
Other anions
Other cations
Related compounds
 Boron monofluoride
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is checkY☒N ?)

Boron trifluoride is the inorganic compound with the formula BF3. This pungent, colourless, and toxic gas forms white fumes in moist air. It is a useful Lewis acid and a versatile building block for other boron compounds.

Structure and bonding

[edit]

The geometry of a molecule of BF3 is trigonal planar. Its D3h symmetry conforms with the prediction of VSEPR theory. The molecule has no dipole moment by virtue of its high symmetry. The molecule is isoelectronic with the carbonate anion, CO2−3.

BF3 is commonly referred to as "electron deficient," a description that is reinforced by its exothermic reactivity toward Lewis bases.

In the boron trihalides, BX3, the length of the B–X bonds (1.30 Å) is shorter than would be expected for single bonds,[7] and this shortness may indicate stronger B–X π-bonding in the fluoride. A facile explanation invokes the symmetry-allowed overlap of a p orbital on the boron atom with the in-phase combination of the three similarly oriented p orbitals on fluorine atoms.[7] Others point to the ionic nature of the bonds in BF3.[8]

Boron trifluoride pi bonding diagram

Synthesis and handling

[edit]

BF3 is manufactured by the reaction of boron oxides with hydrogen fluoride:

B2O3 + 6 HF → 2 BF3 + 3 H2O

Typically the HF is produced in situ from sulfuric acid and fluorite (CaF2).[9] Approximately 2300-4500 tonnes of boron trifluoride are produced every year.[10]

Laboratory scale

[edit]

For laboratory scale reactions, BF3 is usually produced in situ using boron trifluoride etherate, which is a commercially available liquid.

Laboratory routes to the solvent-free materials are numerous. A well documented route involves the thermal decomposition of diazonium salts of [BF4]−:[11]

[PhN2]+[BF4]− → PhF + BF3 + N2

Alternatively it arises from the reaction of sodium tetrafluoroborate, boron trioxide, and sulfuric acid:[12]

6 Na[BF4] + B2O3 + 6 H2SO4 → 8 BF3 + 6 NaHSO4 + 3 H2O

Properties

[edit]

Anhydrous boron trifluoride has a boiling point of −100.3 °C and a critical temperature of −12.3 °C, so that it can be stored as a refrigerated liquid only between those temperatures. Storage or transport vessels should be designed to withstand internal pressure, since a refrigeration system failure could cause pressures to rise to the critical pressure of 49.85 bar (4.985 MPa).[13]

Boron trifluoride is corrosive. Suitable metals for equipment handling boron trifluoride include stainless steel, monel, and hastelloy. In presence of moisture it corrodes steel, including stainless steel. It reacts with polyamides. Polytetrafluoroethylene, polychlorotrifluoroethylene, polyvinylidene fluoride, and polypropylene show satisfactory resistance. The grease used in the equipment should be fluorocarbon based, as boron trifluoride reacts with the hydrocarbon-based ones.[14]

Reactions

[edit]

Unlike the aluminium and gallium trihalides, the boron trihalides are all monomeric. They undergo rapid halide exchange reactions:

BF3 + BCl3 → BF2Cl + BCl2F

Because of the facility of this exchange process, the mixed halides cannot be obtained in pure form.

Boron trifluoride is a versatile Lewis acid that forms adducts with such Lewis bases as fluoride and ethers:

CsF + BF3 → Cs[BF4]
O(CH2CH3)2 + BF3 → BF3·O(CH2CH3)2

Tetrafluoroborate salts are commonly employed as non-coordinating anions. The adduct with diethyl ether, boron trifluoride diethyl etherate, or just boron trifluoride etherate, (BF3·O(CH2CH3)2) is a conveniently handled liquid and consequently is widely encountered as a laboratory source of BF3.[15] Another common adduct is the adduct with dimethyl sulfide (BF3·S(CH3)2), which can be handled as a neat liquid.[16]

Comparative Lewis acidity

[edit]

All three lighter boron trihalides, BX3 (X = F, Cl, Br) form stable adducts with common Lewis bases. Their relative Lewis acidities can be evaluated in terms of the relative exothermicities of the adduct-forming reaction. Such measurements have revealed the following sequence for the Lewis acidity:

BF3 < BCl3 < BBr3 < BI3 (strongest Lewis acid)

This trend is commonly attributed to the degree of π-bonding in the planar boron trihalide that would be lost upon pyramidalization of the BX3 molecule.[17] which follows this trend:

BF3 > BCl3 > BBr3 < BI3 (most easily pyramidalized)

The criteria for evaluating the relative strength of π-bonding are not clear, however.[7] One suggestion is that the F atom is small compared to the larger Cl and Br atoms. As a consequence, the bond length between boron and the halogen increases while going from fluorine to iodine hence spatial overlap between the orbitals becomes more difficult. The lone pair electron in pz of F is readily and easily donated and overlapped to empty pz orbital of boron. As a result, the pi donation of F is greater than that of Cl or Br.

In an alternative explanation, the low Lewis acidity for BF3 is attributed to the relative weakness of the bond in the adducts F3B−L.[18][19]

Yet another explanation might be found in the fact that the pz orbitals in each higher period have an extra nodal plane and opposite signs of the wave function on each side of that plane. This results in bonding and antibonding regions within the same bond, diminishing the effective overlap and so lowering the π-donating blockage of the acidity.[20]

Hydrolysis

[edit]

Boron trifluoride reacts with water to give boric acid and fluoroboric acid. The reaction commences with the formation of the aquo adduct, H2O−BF3, which then loses HF that gives fluoroboric acid with boron trifluoride.[21]

4 BF3 + 3 H2O → 3 H[BF4] + B(OH)3

The heavier trihalides do not undergo analogous reactions, possibly due to the lower stability of the tetrahedral ions [BCl4]− and [BBr4]−. Because of the high acidity of fluoroboric acid, the fluoroborate ion can be used to isolate particularly electrophilic cations, such as diazonium ions, that are otherwise difficult to isolate as solids.

Uses

[edit]

Organic chemistry

[edit]

Boron trifluoride is most importantly used as a reagent in organic synthesis, typically as a Lewis acid.[10][22] Examples include:

Niche uses

[edit]

Other, less common uses for boron trifluoride include:

Discovery

[edit]

Boron trifluoride was discovered in 1808 by Joseph Louis Gay-Lussac and Louis Jacques Thénard, who were trying to isolate "fluoric acid" (i.e., hydrofluoric acid) by combining calcium fluoride with vitrified boric acid. The resulting vapours failed to etch glass, so they named it fluoboric gas.[26][27]

See also

[edit]

References

[edit]
  1. ^ Prudent Practices in the Laboratory. 16 August 1995. doi:10.17226/4911. ISBN 978-0-309-05229-0. Archived from the original on 14 December 2014. Retrieved 7 May 2018. {{cite book}}: |website= ignored (help)
  2. ^ a b c d NIOSH Pocket Guide to Chemical Hazards. "#0062". National Institute for Occupational Safety and Health (NIOSH).
  3. ^ "Boron trifluoride". Immediately Dangerous to Life or Health Concentrations (IDLH). National Institute for Occupational Safety and Health (NIOSH).
  4. ^ Index no. 005-001-00-X of Annex VI, Part 3, to Regulation (EC) No 1272/2008 of the European Parliament and of the Council of 16 December 2008 on classification, labelling and packaging of substances and mixtures, amending and repealing Directives 67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006. OJEU L353, 31.12.2008, pp 1–1355 at p 341.
  5. ^ "Boron trifluoride", Pocket Guide to Chemical Hazards, U.S. Department of Health and Human Services (NIOSH) Publication No. 2005-149, Washington, DC: Government Printing Office, 2005, ISBN 9780160727511.
  6. ^ Inc, New Environment. "New Environment Inc. - NFPA Chemicals". www.newenv.com. Archived from the original on 27 August 2016. Retrieved 7 May 2018. {{cite web}}: |last= has generic name (help)
  7. ^ a b c Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. ISBN 978-0-08-037941-8.
  8. ^ Gillespie, Ronald J. (1998). "Covalent and Ionic Molecules: Why Are BeF2 and AlF3 High Melting Point Solids whereas BF3 and SiF4 Are Gases?". Journal of Chemical Education. 75 (7): 923. Bibcode:1998JChEd..75..923G. doi:10.1021/ed075p923.
  9. ^ Holleman, A. F.; Wiberg, E. (2001). Inorganic Chemistry. San Diego: Academic Press. ISBN 0-12-352651-5.
  10. ^ a b Brotherton, R. J.; Weber, C. J.; Guibert, C. R.; Little, J. L. "Boron Compounds". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a04_309. ISBN 978-3527306732.
  11. ^ Flood, D. T. (1933). "Fluorobenzene". Organic Syntheses. 13: 46; Collected Volumes, vol. 2, p. 295.
  12. ^ a b Brauer, Georg (1963). Handbook of Preparative Inorganic Chemistry. Vol. 1 (2nd ed.). New York: Academic Press. p. 220 & 773. ISBN 978-0121266011.
  13. ^ Yaws, C. L., ed. (1999). Chemical Properties Handbook. McGraw-Hill. p. 25.
  14. ^ "Boron trifluoride". Gas Encyclopedia. Air Liquide. 2016-12-15. Archived from the original on 2006-12-06.
  15. ^ Cornel, Veronica; Lovely, Carl J. (2007). "Boron Trifluoride Etherate". Encyclopedia of Reagents for Organic Synthesis. doi:10.1002/9780470842898.rb249.pub2. ISBN 978-0471936237. S2CID 100921225.
  16. ^ Heaney, Harry (2001). "Boron Trifluoride-Dimethyl Sulfide". Encyclopedia of Reagents for Organic Synthesis. doi:10.1002/047084289X.rb247. ISBN 0471936235.
  17. ^ Cotton, F. Albert; Wilkinson, Geoffrey; Murillo, Carlos A.; Bochmann, Manfred (1999), Advanced Inorganic Chemistry (6th ed.), New York: Wiley-Interscience, ISBN 0-471-19957-5
  18. ^ Boorman, P. M.; Potts, D. (1974). "Group V Chalcogenide Complexes of Boron Trihalides". Canadian Journal of Chemistry. 52 (11): 2016–2020. doi:10.1139/v74-291.
  19. ^ Brinck, T.; Murray, J. S.; Politzer, P. (1993). "A Computational Analysis of the Bonding in Boron Trifluoride and Boron Trichloride and their Complexes with Ammonia". Inorganic Chemistry. 32 (12): 2622–2625. doi:10.1021/ic00064a008.
  20. ^ Here on Wikipedia an easy to understand table is found, which shows drawings of the several higher p orbitals.
  21. ^ Wamser, C. A. (1951). "Equilibria in the System Boron Trifluoride–Water at 25°". Journal of the American Chemical Society. 73 (1): 409–416. doi:10.1021/ja01145a134.
  22. ^ Heaney, H. (2001). "Boron Trifluoride". Encyclopedia of Reagents for Organic Synthesis. doi:10.1002/047084289X.rb250. ISBN 0-471-93623-5.
  23. ^ Mani, Rama I.; Erbert, Larry H.; Manise, Daniel (1991). "Boron Trifluoride in the Synthesis of Plant Phenolics: Synthesis of Phenolic Ketones and Phenyl Stryl Ketones" (PDF). Journal of Tennessee Academy of Science. 66 (1): 1–8. Archived from the original (PDF) on 27 October 2016. Retrieved 27 October 2016.
  24. ^ Sowa, F. J.; Hennion, G. F.; Nieuwland, J. A. (1935). "Organic Reactions with Boron Fluoride. IX. The Alkylation of Phenol with Alcohols". Journal of the American Chemical Society. 57 (4): 709–711. doi:10.1021/ja01307a034.
  25. ^ "Boron Trifluoride (BF3) Applications". Honeywell. Archived from the original on 2012-01-29.
  26. ^ Gay-Lussac, J. L.; Thénard, L. J. (1809). "Sur l'acide fluorique". Annales de Chimie. 69: 204–220.
  27. ^ Gay-Lussac, J. L.; Thénard, L. J. (1809). "Des propriétés de l'acide fluorique et sur-tout de son action sur le métal de la potasse". Mémoires de Physique et de Chimie de la Société d'Arcueil. 2: 317–331.
[edit]
Retrieved from "https://en.wikipedia.org/w/index.php?title=Boron_trifluoride&oldid=1254180898"