Mordant
A mordant or dye fixative is a substance used to set (i.e., bind) dyes on fabrics. It does this by forming a coordination complex with the dye, which then attaches to the fabric (or tissue).[1] It may be used for dyeing fabrics or for intensifying stains in cell or tissue preparations. Although mordants are still used, especially by small batch dyers, they have been largely displaced in industry by directs.[2]
The term mordant comes from the Latin mordere, "to bite". In the past, it was thought that a mordant helped the dye "bite" onto the fiber so that it would hold fast during washing. A mordant is often a polyvalent metal ion, and one example is chromium (III).[3] The resulting coordination complex of dye and ion is colloidal and can be either acidic or alkaline.
Common dye mordants
[edit]Mordants include tannic acid, oxalic acid,[4] alum, chrome alum, sodium chloride, and certain salts of aluminium, chromium, copper, iron, iodine, potassium, sodium, tungsten, and tin.
Iodine is often referred to as a mordant in Gram stains, but is in fact a trapping agent.[3][failed verification]
Dyeing methods
[edit]
The three methods used for mordanting are:
- Pre-mordanting (onchrome): The substrate is treated with the mordant and then the dye. The complex between the mordant and dye is formed on the fibre.
- Meta-mordanting (metachrome): The mordant is added in the dye bath itself. The process is simpler than pre- or post-mordanting, but is applicable to only a few dyes. Mordant red 19 shown above is applied in this manner
- Post-mordanting (afterchrome): The dyed material is treated with a mordant. The complex between the mordant and dye is formed on the fibre.
The type of mordant used affects the shade obtained after dyeing and also affects the fastness property of the dye. The application of mordant, either pre-mordant, meta-mordant or post-mordant methods, is influenced by:
- The action of the mordant on the substrate: if the mordant and dye methods are harsh (for example, an acidic mordant with an acidic dye), pre-mordanting or post-mordanting limits the potential for damage to the substrate.
- The stability of the mordant or dye lake or both: the formation of a stable dye lake means that the mordant can be added in the dye without risk of losing the dye properties (meta-mordanting).
Dye results can also rely on the mordant chosen as the introduction of the mordant into the dye will have a marked effect on the final color. Each dye can have different reactions to each mordant. For example, cochineal scarlet, or Dutch scarlet as it came to be known, used cochineal along with a tin mordant to create a brilliant orange-hued red.[5]
Residual iron mordant can damage or fade fabric, producing "dye rot".[6]
Dye lake
[edit]The dye lake is an insoluble complex formed upon combining the dye and mordant, which then attaches to the substrate. Mordants increase the fastness of the dye since the higher molecular weight dye is now bonded to the fibre.[3]
The type of mordant used can change the colour of both the dye-plus-mordant solution and influence the shade of the final product.
Wool
[edit]Unlike cotton, wool is highly receptive toward mordants. Due to its amphoteric nature wool can absorb acids and bases with equal efficiency. When wool is treated with a metallic salt it hydrolyses the salt into an acidic and basic component. The basic component is absorbed at –COOH group and the acidic component is removed during washing. Wool also has a tendency to absorb fine precipitates from solutions; these cling to the surface of fibres and dye particles attached to these contaminants result in poor rubbing fastness.
Silk
[edit]Like wool, silk is also amphoteric and can absorb both acids and bases. However, wool has thio groups (-SH) from the cystine amino acid, which act as reducing agent and can reduce hexavalent chromium of potassium dichromate to trivalent form. The trivalent chromium forms the complex with the fibre and dye. Therefore, potassium dichromate cannot be used effectively as mordant.
Animal and plant tissues
[edit]In histology, mordants are indispensable in fixing dyes to tissues for microscopic examination.
Methods for mordant application depend on the desired stain and tissues under study; pre-, meta- and post-mordanting techniques are used as required.
The most commonly used stain used in diagnostic histology of animal tissues is Harris' haematoxylin as part of a haematoxylin and eosin (H&E) stain.
References
[edit]- ^ IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version: (2006–) "mordant". doi:10.1351/goldbook.M04029
- ^ Hunger, Klaus; Mischke, Peter; Rieper, Wolfgang; Zhang, Shufen} (March 8, 2019). Azo Dyes, 5. Developing Dyes. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA. pp. 1–19. doi:10.1002/14356007.o03_o09.pub2. ISBN 9783527306732. OCLC 46878292.
{{cite book}}:|work=ignored (help) - ^ a b c Llewellyn, Bryan D. (May 2005). "Stain Theory – How mordants work". Archived from the original on May 20, 2016.
- ^ Von Wagner, Rudolf (1897). Manual of chemical technology. New York: D. Appleton & Co. p. 499.
- ^ Phipps, Elena (2010). Cochineal Red The Art History of a Color, p34. Yale University Press, New Haven and London. ISBN 978-0-300-15513-6.
- ^ "Quilt History- informational site about antique quilts and vintage textiles including article and an interactive chat group". Archived from the original on 2012-12-21. Retrieved 2012-01-29.
Further reading
[edit]- Buchanan, Rita (1999). A Weaver's Garden: Growing Plants for Natural Dyes and Fibers. Courier Corporation. ISBN 9780486407128.
- Barber, E. J. W. (1991). Prehistoric Textiles: The Development of Cloth in the Neolithic and Bronze Ages with Special Reference to the Aegean. Princeton University Press. ISBN 069100224X.
External links
[edit]| Techniques |  | |
|---|---|---|
| Types of dyes | ||
| Traditional textile dyes | ||
| History | ||
| Craft dyes | ||
| Reference | ||